license: other license_name: qwen-community-1.0 base_model:

• orcarouter/Qwen3.8-Flash-Next-Uncensored
• Qwen/Qwen3.8-Flash-Next base_model_relation: quantized pipeline_tag: text-generation library_name: gguf tags:
• gguf
• rocmfp4
• imatrix
• qwen4exp
• llama.cpp
• strix-halo
• gfx1151
• rocm
• amd
• ryzen-ai-max
• uncensored
• research

🔧 Runtime: build the ROCmFPX fork below

Stock llama.cpp will not load this file. You need both the qwen4exp architecture and the ROCmFP4 tensor types in one tree. Our fork kingjones30/ROCmFPX (fork of charlie12345/ROCmFPX, branch main) has both.

git clone https://github.com/kingjones30/ROCmFPX.git
cd ROCmFPX
cmake -B build -DGGML_HIP=ON -DGPU_TARGETS=gfx1151 -DGGML_NATIVE=ON -DCMAKE_BUILD_TYPE=Release
cmake --build build --target llama-server llama-quantize -j$(nproc)

⚠️ Apply the bundled fix patches before cmake: qwen4exp-qsa-checkpoint-fix.patch always, plus qwen4exp-mtp-graph-fork.patch if you want --spec-type draft-mtp on this clone. Full steps further down.

Qwen3.8-Flash-Next-Uncensored — ROCmFP4 STRIX_LEAN imatrix GGUF — AMD Ryzen AI Max+ 395 / gfx1151

The importance-matrix-calibrated STRIX_LEAN build — the highest-quality tier in this family. STRIX_LEAN already spends more bits than FAST (Q5 token embeddings and PLE, half the attention at higher precision); importance-weighted quantization on top gives it the lowest perplexity of any tier here.

⚠️ Research artifact. Refusal behaviour has been removed. This does not add capability — it removes guardrails. Use it deliberately, in a context where that is appropriate, and own the output.

Measured quality — held-out WikiText-2 raw, -c 512

4.9865 is the lowest perplexity across the whole family — −6.7% vs plain FAST, and −0.9% below the FAST imatrix tier at the same calibration. That gap over FAST is the richer STRIX_LEAN recipe (higher-precision embeddings/PLE) plus the imatrix weighting.

Honesty note: I do not publish a "plain STRIX_LEAN vs imatrix STRIX_LEAN" number, because the source BF16 was reclaimed after the build and I can't re-quantize a non-imatrix STRIX_LEAN for a clean same-recipe delta. The clean isolated imatrix effect (same recipe, imatrix on/off) is the FAST tier's −5.9%; expect STRIX_LEAN's isolated imatrix gain to be in the same range. imatrix moves quality, not speed — decode t/s is unchanged.

• Calibration corpus: bartowski calibration_datav3.
• ⚠️ imatrix computed on the 4-bit model (the 51.2B PLE + 128 GB GTT ceiling blocks a BF16 forward pass on Strix Halo).

Speculative decoding (MTP)

draft-mtp works on this arch once you apply qwen4exp-mtp-graph.patch (bundled) — it fixes the graph combiner that otherwise held acceptance near 0.36. Pair with the stock Flash-Next MTP head from kingjones777/Qwen3.8-Flash-Next-MTP-Heads-GGUF. Measured on the FAST tier with the fixed graph: acceptance 0.94 (+27.7% tok/s), at short context (-c 2048) with the Q8_0 head (mtp-Qwen3.8-Flash-Next-Q8_0.gguf, in the heads repo). STRIX_LEAN uses the same graph, but its own MTP speed has not been measured, and the published heads (Q6_K, Q4) were not benchmarked. The head is stock Flash-Next — it only proposes drafts, the main model verifies every token, so it never alters this model's output.

llama-server -m Qwen3.8-Flash-Next-Uncensored-Q4_0-ROCmFP4-STRIX_LEAN-imatrix-00001-of-00003.gguf \
  -md mtp-Qwen3.8-Flash-Next-Q8_0.gguf --spec-type draft-mtp \
  --spec-draft-n-min 0 --spec-draft-n-max 1 --n-gpu-layers-draft 99 \
  -ngl 999 -fa on -np 1 -c 32768 --jinja

With the bundled checkpoint fix applied this is verified to 128K (see below); raise -c to suit your context. Without that patch, keep speculative decoding at ≤32K.

⚠️ Updated 2026-09-17 — re-download if you pulled it earlier. qwen4exp-mtp-graph.patch now carries the models.h and llama-model.cpp hunks it needs. The previous version applied cleanly but failed to compile ('graph_mtp' was not declared in this scope). The bundled patch matches the build steps on this card; for the other build path use qwen4exp-mtp-graph-fork.patch (if you build from a kingjones30/ROCmFPX clone), also bundled here.

Measured plain vs draft-mtp — median of 3 per cell, one binary, greedy, cache_prompt:false, 256 generated tokens, -c 2048, Q8_0 head, Uncensored STRIX_LEAN-imatrix weights, gfx1151 / ROCm 7.2.4 (2026-09-17):

⭐ Use --spec-draft-n-max 1. It did not lose a single workload here, and it wins most where the next token is predictable. n-max 4 pays for four draft forward passes per step, so it only wins when acceptance is high (reasoning, JSON) and is a genuine loss on code and long-document work. MTP also costs prefill speed, because the draft head processes the prompt too. The older +27.7% figure came from one reasoning-shaped prompt — it holds for that shape, not universally, so measure your own.

✅ Depth: draft-mtp is fixed and measured (2026-09-17)

The ≥64K wedge came from context-checkpoint restores leaving the QSA indexer cache (mem_idx) out of the checkpoint. The fix ships here as qwen4exp-qsa-checkpoint-fix.patch — it overrides state_write / state_read on llama_memory_hybrid_idx. Apply it with the build steps on this card even if you never use speculative decoding.

With it applied, --spec-type draft-mtp ran clean from 2K to 128K on gfx1151: 8 depth rungs, 864 context-checkpoint restores (2 of them prompt-cache rollbacks at 64K), 0 GPU faults, coherent output at every depth. Measured 2026-09-17 on Ryzen AI MAX+ 395 / ROCm 7.2.4 with the Uncensored STRIX_LEAN-imatrix weights + mtp-Qwen3.8-Flash-Next-Q8_0.gguf, -c 262144, --spec-draft-n-max 4, default context checkpoints. That 128K run used my own fork tree; the exact build steps on this card were verified to 16K.

⚠️ Still open: --spec-type ngram-mod at ≥64K has not been retested with the patch — the original field report (…-STRIX-GGUF#6, thanks @liusecret) was ngram-mod, so keep -ctxcp 0 -cpent -1 when you use it. And do not use speculative decoding of any kind on Vulkan/gfx1151 — acceptance collapses to 0.

A speculative replay stalled warning on ~2% of restores is expected and harmless: that is the server's livelock guard dropping one draft and decoding that token normally.

Recipe

Quantized from the BF16 weights published by orcarouter/Qwen3.8-Flash-Next-Uncensored — the abliteration is theirs. 4.78 bpw, 98.5 GiB.

Building the runtime

Two patches, both bundled: qwen4exp-on-rocmfpx-d3ca537.patch (arch, 156 KB) and qwen4exp-mtp-graph.patch (draft-mtp fix).

git clone https://github.com/charlie12345/ROCmFPX.git
cd ROCmFPX && git checkout d3ca537
curl -LO https://huggingface.co/kingjones777/Qwen3.8-Flash-Next-Uncensored-ROCmFP4-STRIX_LEAN-imatrix-GGUF/resolve/main/qwen4exp-on-rocmfpx-d3ca537.patch
git apply qwen4exp-on-rocmfpx-d3ca537.patch
curl -LO https://huggingface.co/kingjones777/Qwen3.8-Flash-Next-Uncensored-ROCmFP4-STRIX_LEAN-imatrix-GGUF/resolve/main/qwen4exp-mtp-graph.patch   # optional
git apply qwen4exp-mtp-graph.patch
# the checkpoint fix also ships in this repo — apply it before configuring:
curl -LO https://huggingface.co/kingjones777/Qwen3.8-Flash-Next-Uncensored-ROCmFP4-STRIX_LEAN-imatrix-GGUF/resolve/main/qwen4exp-qsa-checkpoint-fix.patch
git apply qwen4exp-qsa-checkpoint-fix.patch      # checkpoint safety at >=64K: apply this always
cmake -B build -DGGML_HIP=ON -DGPU_TARGETS=gfx1151 -DGGML_NATIVE=ON -DCMAKE_BUILD_TYPE=Release
cmake --build build --target llama-server llama-quantize -j$(nproc)

Speed — Ryzen AI MAX+ 395, gfx1151, ROCm 7.2.4, full offload

Decode speed is the same as the plain STRIX_LEAN build (same layout): 23.20 tok/s gen / 377.8 tok/s prompt / 63.3 GiB GTT, one fixed 6,963-token prompt, cache_prompt:false, median of 4. Native max context 262,144 on a 128 GB box.

Files

Usage

llama-server \
  --model Qwen3.8-Flash-Next-Uncensored-Q4_0-ROCmFP4-STRIX_LEAN-imatrix-00001-of-00003.gguf \
  --mmproj mmproj-Qwen3.8-Flash-Next-Uncensored-BF16.gguf \
  --host 127.0.0.1 --port 8080 \
  --n-gpu-layers 999 --flash-attn on --fit off \
  --ctx-size 131072 --threads 16 --jinja

Do not use --no-mmap (and do not use -dio). The PLE table streams from the file through the page cache; forcing it into anonymous memory gets the process OOM-killed with nothing in the log.

Reproduction

quantize: llama-quantize --imatrix unc.imatrix <BF16> <out> Q4_0_ROCMFP4_STRIX_LEAN 16
ppl     : llama-perplexity -m <this> -f wiki.test.raw -ngl 999 -fa on -dev ROCm0 -c 512   (NO -dio)

A number without its binary is a rumour — every figure above is measured on the fork runtime above.

Acknowledgements

charlie12345/ROCmFPX — ROCmFP4 tensor formats (MIT). llama.cpp — engine, GGUF, conversion tooling. AMD ROCm — ROCm 7.2.4, gfx1151. orcarouter — the uncensored BF16 checkpoint. Qwen team — the base model. License qwen-community-1.0.